Duro-Last ATR Hub - Manual

DATA SHEET
ATR Hub (Access Through Roof)
“Duro-Last” and “EXCEPTIONAL” are registered marks owned by Duro-Last Roofing, Inc. Revised 8/12/2012
Description:
The ATR Hub eliminates the need for multiple pitch
pans in one small area.
Fabricated from 24-gauge vinyl-coated metal
and 6” Duro-Last
® membrane skirt.
The 24-gauge Galvalume® prefinished top
replaces the need for pourable filler.
Unused boots can be welded closed for future
use.
Available in white, tan, gray, and dark gray.
Available in 8” x 8” x 14” standard or custom
sizes.
Ideal for new construction.
Contact Duro-Last or EXCEPTIONAL
®
Metals to
request a color chart, samples and information
regarding custom metals and finishes.
Installation:
1. Install in accordance with Duro-Last detail
drawing #4047.
2. Any deviation from the requirements set forth in
the detail drawings must be pre-approved, in
writing, by the EXCEPTIONAL Metals Technical
Department.
Warranty:
Duro-Last® offers a wide range of warranty coverage
for EXCEPTIONAL Metals products when used with the
Duro-Last roofing system, including paint and finish.
Technical Services:
Product samples, detail sheets, color chips, and color
chart are available for your submittal package. For
assistance with questions or submittals, contact your
local representative or call EXCEPTIONAL Metals.