Duro-Last Counter Flashing and Reglet - Manual

DATA SHEET
Counter Flashing & Reglet
“Duro-Last” and “EXCEPTIONAL” are registered marks owned by Duro-Last Roofing, Inc. Revised 8/30/2012
Description:
Reglets provide a watertight protection along parapet
wall termination that delivers a professional
appearance. Available as a 1 or 2-Piece system and
surface mount.
Manufactured from various metals, (see chart
below), to specific projects in
10’ lengths.
Counter flashes parapet terminations providing a
finished look.
Bottom flashing on 2-piece reglet is easily
removed for re-roofing or maintenance. Rivets
secure counter flashing to receiver.
Contact Duro-Last ® or EXCEPTIONAL ® Metals to
request a color chart, samples and information
regarding custom metals and finishes.
Energy Efficiency:
LEED
®
and ENERGY STAR
®
compliant; Recyclable.
Installation:
1. Only applicable to concrete or block walls.
2. Install in accordance with Duro-Last detail
drawings #6130 and #6145.
3. Any deviation from the requirements set forth in
the detail drawings must be pre-approved, in
writing, by the EXCEPTIONAL Metals Technical
Department.
Warranty:
Duro-Last offers a wide range of warranty coverage for
EXCEPTIONAL Metals products when used with the
Duro-Last roofing system, including paint and finish.
Technical Services:
Product samples, detail sheets, color chips, and color
chart are available for your submittal package. For
assistance with questions or submittals, contact your
local representative or call EXCEPTIONAL Metals.
Material Gauge Finish
Aluminum .040 Mill or Kynar ®
Stainless Steel 24-gauge N/A
Bonderized Steel 24-gauge N/A
Galvalume 24-gauge Mill or Kynar ®
Copper 16 oz. Mill
1-Piece Reglet
2-Piece Reglet
Surface Mount
Counter Flashing