B&B Electronics VESR9xx - Fiber Models - Manual - Manual (Page 52)

Appendix B
www.bb-elec.com
www.bb-europe.com
46
NETWORK SPECIFICATIONS
Memory Serial Memory 8 KB per port
Network Memory 4 KB
I/P Port Addresses 5300 Heartbeat & Configuration setting in TCP
Mode (i.e. Pair Mode)
8888 VESR9xx update
Network
Communications
LAN 10/100 Mbps Auto-detecting 10BaseT or
100BaseTX
Network Physical
Layer Standards
Ethernet IEEE 802.3 autodetecting & auto MDI/MDX
10BaseT and 100BaseTX
Protocols Supported TCP, IPv4, UDP, ARP, HTTP 1.0,
ICMP/PING, DHCP/BOOTP
IP Mode Static, DHCP
TCP/UDP User definable
UDP Unicast or Multicast
Connection Modes Server, Client, VCOM, Paired
Client Connection At power up or upon data arrival
Search Serial direct COM and Ethernet autosearch
or specific IP
Diagnostics Display PC IP, ping, test VCOM, save test
config (text readable)
Firmware Upgrade Via serial, Ethernet or auto web search
Character count 0 to 65535
Delimiters Hex 1 00 to FF (send serial data if delimiter hex 1
only is set and received)
Hex 2 00 to FF (send serial data if delimiter hex 1
and 2 are set and received)
Timeouts Inter-character 0 to 65535 ms
Serial 0 to 65535 sec
TCP alive 0 to 255 min
Force transmit 0 to 65535 ms
Max character count 0 to 8192 bytes