Rainbow Electronics GM862-QUAD-PY - Manual (Page 60)

GM862-QUAD / PY Software User Guide
1vv0300747 Rev. 3 - 10/07/07
Reproduction forbidden w ithout Telit Communications S.p.A. w ritten authorization - All Rights Reserved page 60 of 96
- broadcast reporting option
0 - Cell Broadcast Messages are not sent to the DTE
2 - New Cell Broadcast Messages are sent to the DTE with the unsolicited result code:
(PDU Mode)
+CBM:
where:
- PDU length
- message PDU
(TEXT Mode)
+CBM:,,,,
where:
- message serial number
- message ID
- Data Coding Scheme
- page number
- total number of pages of the message
- CBM Content of Message
- SMS-STATUS-REPORTs reporting option
0 - status report receiving is not reported to the DTE
1 - the status report is sent to the DTE with the following unsolicited result code:
(PDU Mode)
+CDS:
where:
- PDU length
- message PDU
(TEXT Mode)
+CDS: ,,,,,
2 - if a status report is stored, then the following unsolicited result code is sent:
+CDSI: ,
where:
- memory storage where the new message is stored
"SM"
- location on the memory where SM is stored
- buffered result codes handling method: