Rainbow Electronics GM862-QUAD-PY - Manual (Page 35)

GM862-QUAD / PY Software User Guide
1vv0300747 Rev. 3 - 10/07/07
Reproduction forbidden w ithout Telit Communications S.p.A. w ritten authorization - All Rights Reserved page 35 of 96
AT+CPBF="FAUSTO"
response:
+CME ERROR: 22
or if extended error codes are disabled simply
response:
ERROR
3.1.3 Phonebook entry read by Index
As first thing, you must select the desired storage as active (see par.3.1.1.1). Then:
•
send command
AT+CPBR=
where:
is the index number of the desired PB record to be read.
•
wait for response in the format:
+CPBR= ,"",,""
OK
where:
is the record number on the PB;
is the phone number;
is the type of number:
145 – international numbering scheme
129 – national numbering scheme
is the alphanumeric name associated with the number.
or in the case the index number does not correspond to a written record:
+CME ERROR: 22 or simply ERROR.
For example:
1- Let's assume you want to select the "SM" normal phonebook for operations,
command:
AT+CPBS="SM"
response
OK
- Now you might want to look for the entry at the position index = 7
command:
AT+CPBR=7
the response may look like:
+CPBR= 7,"+39404192369",145,"Fabio"
OK