Rainbow Electronics GM862-QUAD-PY - Manual (Page 39)

GM862-QUAD / PY Software User Guide
1vv0300747 Rev. 3 - 10/07/07
Reproduction forbidden w ithout Telit Communications S.p.A. w ritten authorization - All Rights Reserved page 39 of 96
3.1.6 Phonebook entry Dial
You may want to dial a number previously stored in the phonebook. As first thing, you must find the
desired phone number index position, to do it use the +CPBF command. Once the number is
known set up the device for the type of call you want to dial. Then:
•
send command ATD>
where:
is the index number of the desired PB record to be dialed.
wait for response according to the call type you issued.
For example:
1- Let's assume you want to make a Voice call on the internal audio path MT to "Fabio" whose number
is stored on the SIM PB:
- Select the PB as active storage
command:
AT+CPBS="SM"
response
OK
- Now find the index number where "Fabio" is recorded:
command:
AT+CPBF="Fabio"
the response may look like:
+CPBF= 7,"+39404192369",145,"Fabio"
OK
- the first field is the index position: 7 in this case.
- Now set up Voice call:
command:
AT+FCLASS=8
response:
OK
AT#CAP=2
OK
AT+CLVL=8
OK
AT+CMUT?
+CMUT: 0
- and Dial:
ATD> 7
OK