Rainbow Electronics GM862-QUAD-PY - Manual (Page 36)

GM862-QUAD / PY Software User Guide
1vv0300747 Rev. 3 - 10/07/07
Reproduction forbidden w ithout Telit Communications S.p.A. w ritten authorization - All Rights Reserved page 36 of 96
- Now you might want to look for the entries at the positions from 7 to 9 and for example the position at
index 8 is empty
command:
AT+CPBR=7,9
the response may look like:
+CPBR= 7,"+39404192369",145,"Fabio"
+CPBR= 9,"0404192111",129,"Fabrizio"
OK
3.1.4 Phonebook entry Write
As first thing, you must select the desired storage as active (see par.3.1.1.1). Then:
•
send command
AT+CPBW=,,,
where:
is the index number of the desired PB record to be written (may be omitted if any
empty record number can be used).
is the phone number;
is the type of number:
145 – international numbering scheme (contains the character "+")
129 – national numbering scheme
is the alphanumeric name associated with the number.
•
wait for response:
Response Reason Action
OK Record has been successfully
written Proceed ahead
ERROR some error occurred Enable extended result codes
(see par. 2.5.2.1), and retry.
+CME ERROR: 10 SIM not present Check SIM or require SIM
insertion and repeat from par.
2.5.2.2
+CMS ERROR: 310 SIM not present Check SIM or require SIM
insertion and repeat from par.
2.5.2.2
+CME ERROR: 11 SIM is present and PIN is
required to continue operations insert SIM PIN (see par.
2.5.2.3)
+CMS ERROR: 311 SIM is present and PIN is
required to continue operations insert SIM PIN (see par.
2.5.2.3)
+CME ERROR: 12 SIM is present and PUK is
required to continue operations insert SIM PUK (see
par.2.5.2.4)