Xerox Phaser 3450 - Manual (Page 40)

Moving and Repacking the Printer
Phaser™ 3450 Laser Printer
33
Moving and Repacking the Printer
Warning
Follow these guidelines to avoid injuring yourself or damaging the printer.
For safety information, go to “Appendices A—User Safety” in this guide.
Follow these guidelines to move the printer within the office or to prepare the printer for
shipment.
Precautions for Moving the Printer
Caution
Remove the print cartridge prior to moving the printer. Failure to do so can result in
damage to the printer.
Moving the Printer Within the Office
The printer can be safely moved from one location within an office to another as long as it
travels in an upright position, gently over smooth surfaces. Any jarring movement, such as
pushing the printer over a raised door threshold or across a parking lot, can damage the printer.
Caution
Remove the print cartridge prior to moving the printer. Failure to do so can result in
damage to the printer.
■ Use one or two people to lift the printer.
■ Always turn off the printer using the
power switch and unplug all cables and
cords.
■ Disconnect and remove the optional
500-Sheet Feeder if present.
■ Always lift the printer from the
designated lift points.
■ Do not place any food or liquids on the
printer.
■ Failure to repackage the printer properly
for shipment can result in damage to the
printer not covered by the warranty,
service agreement, or Total Satisfaction
Guarantee.
■ Damage to the printer caused by
improper moving is not covered by the
Xerox warranty, service agreement, or
Total Satisfaction Guarantee.
33 lbs.
15 kg
3450-056