Printing transparencies from trays 2 or 3 – Xerox Phaser 3450 User Manual
Page 25
Transparencies
Phaser™ 3450 Laser Printer
18
4.
At the printer’s front panel:
a.
Press the Menu button, select
Printer Setup
, then press the OK button.
b.
Select
Paper Handling,
then press the OK button.
c.
Select
Tray 1 Type,
then press the OK button.
d.
Select
Transparency
, then press the OK button.
e.
Press the Cancel button to return to the main menu.
5.
In the printer driver, select Tray 1 (MPT) as the paper source.
Printing Transparencies from Trays 2 or 3
Note
Do not print paper-backed transparencies from Tray 3. Xerox highly recommends that you
print transparencies and other specialty media from Tray 1 (MPT) for best results.
1.
Remove all paper from the tray.
2.
Fan the transparencies to release sheets that may stick together.
3.
Insert the transparencies into the tray. For information about how to load paper in Trays 2
or 3, see the Quick Reference Guide that came with your printer. The Quick Reference
Guide can also be found on the Software and Documentation CD-ROM that came with
your printer, or at
.
4.
At the printer’s front panel:
a.
Press the Menu button, select
Printer Setup
, then press the OK button.
b.
Select
Paper Handling,
then press the OK button.
c.
Select
[Tray 2 Type
or
Tray 3 Type],
then press the OK button.
d.
Select
Transparency
, then press the OK button.
e.
Press the Cancel button to return to the main menu.
5.
In the printer driver, select Tray 2 or Tray 3 as the paper source.
3450-057