Rainbow Electronics ATtiny15L - Manual (Page 35)

35
ATtiny15L
1187E–AVR–06/02
1. In the same operation, write a logical “1” to WDTOE and WDE. A logical “1” must
be written to WDE even though it is set to one before the disable operation
starts.
2. Within the next four clock cycles, write a logical “0” to WDE. This disables the
Watchdog.
• Bits 2..0 – WDP2, WDP1, WDP0: Watchdog Timer Prescaler Bits 2, 1, and 0
The WDP2, WDP1 and WDP0 bits determine the Watchdog Timer prescaling when the
Watchdog Timer is enabled. The different prescaling values and their corresponding
time-out periods are shown in Table 15.
Table 15. Watchdog Timer Prescale Select
WDP2 WDP1 WDP0 Time-out Period
0 0 0 16K cycles
0 0 1 32K cycles
0 1 0 64K cycles
0 1 1 128K cycles
1 0 0 256K cycles
1 0 1 512K cycles
1 1 0 1,024K cycles
1 1 1 2,048K cycles