TC Electronic LM2 - Manual (Page 26)

26
LM2 & TC ICON
• Press the DETECT key. The TC Icon Editor will scan
the system and find the connected units.
• When the connected LM2 unit is detected, assign the
unit to one of the eight shortcut keys in the right side
of the display, by pressing one of the eight keys.
When several units are connected this page serves as
a convenient organizer for the entire system.
• Go to the Frame Select page (top-tab), and you will
see a screen similar to the one below depending on
number of connected units and to which locations
these are assigned.
•
• Press the large LM2 key referring to the LM2 unit you
wish to access.
• TC Icon now retrieves data from the LM2.
• When ready you will see the Radar page.
Operating Pages
• Library pages handle operations such as preset
Recall, Store, Delete, Preset Naming and Bank
handling for backup
• System pages handle overall Clock Settings, I/O
settings and network settings.
• Engine pages are where you control all algorithm
specific processing parameters.
Renaming presets
All user presets can easily be renamed. Typically you
will rename presets during store operations but Click
on the preset name on the Store page and a keyboard
display will open.