TC Electronic LM2 - Manual (Page 15)

15
OvERvIEw EdIT PAgE
Navigating the Edit page
- press the EDIT key to enter the page
- press CURSOR UP/DOWN keys to move cursor and use the ADJUST wheel to change parameter values
- to access Edit page 2, place cursor at the parameter in the bottom of the display and press the CURSOR DOWN key
- to exit the EDIT pages, press EDIT or HOME - or press e.g. UTILITY or I/O keys to navigate directly to those menus.
LM2 automatically returns to the Home page after 30 sec if no key has been touched.
Parameters and settings
Descriptor 1 Loudn. Range, Prog.
Loudn., Sliding Loudn.,
Loudn. Max, Off
Descriptor 2
Sliding Loudness From 3 sec to 8 min
Loudness Max 0.4 sec to 10 sec
Lim Threshold TP -18 dB to off
Lim Profile Dynamic, AC3 Codec,
UniversalLoud, Voice
Lim Link Off, On
Target -6 to -36.0 LUFS (if LUFS)
Norm. Gain +/- 24 dB
Loudness Unit LUFS, LU, LU/LUFS
Loudness Std. EBU R128, ATSC A/85,
Cnt of Grav.
Page 1
Page 2
Page 3
The Edit page is used for selecting the Loudness Descriptors shown on the Home page, measurement standard,
adjustment of normalizing gain, true-peak limiting etc. Note: Edit page parameters are stored and recalled with presets.