TC Electronic LM2 - Manual (Page 11)

OvERvIEw
6 - PAUSE key
Pauses the loudness measurements. When engaged,
the Home page reads “PAUSE” in the upper right-hand
corner.
7 - HOME key
Press Home to toggle between the Home page and the
Stats page. LM2 defaults to the Home page with the
large Loudness Descriptors when not touched for 30
seconds.
When pressed together with neighbor keys, Home
invokes these functions:
HOME + PAUSE: Resets all Loudness Descriptors and
the Loudness Log.
HOME + SET GAIN: Reverts LM2 to unity gain, resets
the Loudness Descriptors and the Loudness Log.
The SET GAIN functions can be disabled on the
I/O page. Factory presets with “Meter” in the title
have SET GAIN functions disabled. Factory
presets with “Ingest” in their title have SET GAIN
functions enabled.
8 - SET GAIN
Additional to metering, LM2 may perform static gain
offsets in order for a program to comply with a certain
Target level. Once a program has been measured, press
the Set Gain key to have LM2 automatically apply the
static gain required to make the program arrive precisely
at Target level.
The Set Gain key also resets the Loudness
descriptors and the Loudness log.
The Set Gain key may be enabled or disabled in
the I/O menu.
The key is disabled in all factory preset banks
called “Meter” while it is enabled in all preset
factory banks called “Ingest”.
9 - RECALL key
The RECALL key recalls presets. Turn the ENCODER to
select a preset, - then press ENTER.
10 - STORE key
Press STORE once to access Store mode.
Then select store location using the ENCODER.
Press ENTER to confirm.
OPERATINg LM2
11