TC Electronic LM2 - Manual (Page 13)

OvERvIEw THE dISPLAy - HOME PAgE
13
The HOME page is the default operation page and the
page LM2 defaults to from several of the sub-menus,
when left untouched for 30 seconds.
To access the HOME page from any menu press HOME.
1 - Preset Name
This is the name of the current preset.
To recall presets press RECALL, scroll using the encoder
and press ENTER to confirm recall.
2 + 3 - Descriptors
LM2 measures Program Loudness, Loudness Range,
Loudness Max and Sliding Loudness permanently. You
may pick one or two of these measurements to be shown
in big numbers on the Home page. Descriptors are
assigned to the Home page from the Edit page.
Which parameter is most relevant to display depends
on your application: For Post Production and Quality
Control, Program Loudness and Loudness Range
are prime candidates. For Live Production, it is more
informative to display Loudness Range alongside Sliding
Loudness. For Ingest of commercials, Loudness Max is
a useful probe in combination with Program Loudness.
Please find more information in the Application section of
this manual.
Regardless of which descriptors are shown on the
Home page, they are all updated and available on
the Stats page, accessed by pressing the Home
key one or two times.
4 - Upper line of the Home Page
In this area, various notes and alerts may appear.
When gain normalization is applied using the SET GAIN
function, the upper left hand corner of the Home page
indicates the gain offset, while the upper right hand
corner shows if the loudness measurement has been
paused.
Descriptor 1 Descriptor 2