Cobalt Digital COMPASS 9414 4 In _ 4 Out Fiber-to-BNC Receiver _ Crosspoint Card - Manual (Page 5)

9400S-OM (V1.1) 9400-SERIES PRODUCT MANUAL 1-1
Chapter 1
Chapter 1
Introduction
Overview
This manual provides installation and operating instructions for the
9400-series SDI/Fiber Multi-Channel Transports with I/O Crosspoint cards
(also referred to herein as the 9400-series).
The 9400-series consist of the following BNC-to-Fiber (Tx) and
Fiber-to-BNC (Rx) transport cards:
Note: This manual covers the 9400-series, which consists of the cards listed above.
These cards vary only in Tx or Rx designation and channel capacity; the dif-
ferences are described in detail later in this section.
Where applicable, descriptions related exclusively to a particular card are
denoted, for example as (9401 only). In all other aspects, all cards in this
series function identically as described in this manual.
BNC-to-Fiber (Tx) Fiber-to-BNC (Rx)
9401
4 BNC In x 1 Fiber Out;
4x1 Crosspoint
9411
1 Fiber In x 4 BNC Out;
1x4 Crosspoint
9402
4 BNC In x 2 Fiber Out;
4x2 Crosspoint
9412
2 Fiber In x 4 BNC Out;
2x4 Crosspoint
9403
4 BNC In x 3 Fiber Out;
4x3 Crosspoint
9413
3 Fiber In x 4 BNC Out;
3x4 Crosspoint
9404
4 BNC In x 4 Fiber Out;
4x4 Crosspoint
9414
4 Fiber In x 4 BNC Out;
4x4 Crosspoint