Rough Country 253X User Manual
Page 13
10. Remove the e-brake from the frame. See Photo 7. Retain the stock hardware for reuse.
11. Remove U-bolts use 27mm socket and lower the axle with the floor jack enough to install the lift block. See Photo 8.
12. Position the lift block on the leaf spring and axle. See Photo 9
13. Install the supplied u-bolts and tighten using a 15/16” socket.
14. Install new bump stop on the axle. Center the bump stop on the mount and mark hole to be drilled. See Photo 10.
15. Drill using a 13/32” bit. See Photo 11.
16. Install the supplied 3/8” x 1 1/4”bolts, flat washers from 1253Bag4 and flag lock nuts from 1253Bag7. See Photo 12.
Tighten using a 9/16” socket.
Photo 7
Photo 8
Photo 9
Photo 10
Photo 11
Photo 12
REMOVE E-BRAKE BRACKET
REMOVE THE U-BOLTS
INSTALL THE NEW BLOCK
PLACE NEW BUMP STOP AND MARK HOLE
DRILL USING A 13/32” DRILL BIT
INSTALL THE HARDWARE IN BUMP STOP
- PERF689 (12 pages)
- 1308 (4 pages)
- 576.20 (16 pages)
- 1010 (4 pages)
- 787.22 (14 pages)
- 282 (14 pages)
- 1098 (1 page)
- 598S (17 pages)
- 379.22 (8 pages)
- 1051 (1 page)
- 392.24 (6 pages)
- 1109 (2 pages)
- 1011 (4 pages)
- 263.22 (9 pages)
- 7599 (4 pages)
- 1169 (2 pages)
- 87496 (4 pages)
- 288.20 (8 pages)
- 324S (20 pages)
- 283N2 (2 pages)
- PERF677 (8 pages)
- 699 (2 pages)
- 1305 (4 pages)
- 774S (10 pages)
- 1403 (2 pages)
- 9219 (2 pages)
- 1186 (1 page)
- 592.20 (8 pages)
- 1113 (2 pages)
- 563.20 (8 pages)
- 1054 (4 pages)
- 479.20 (8 pages)
- 87349 (2 pages)
- 280N2 (12 pages)
- 1021 (4 pages)
- RC0342 (2 pages)
- 3592 (2 pages)
- 1776 (1 page)
- 1182 (1 page)
- 1040 (2 pages)
- 561.20 (4 pages)
- 1117 (4 pages)
- 75113-15 (16 pages)
- PERF662X (8 pages)
- 1156 (2 pages)