Rough Country 242N2 User Manual
Page 9
60. Install the front shock absorber using the supplied sleeves
and secure in the stock location with the stock hardware.
Tighten using a 18mm socket / wrench. See Photo 42.
61. If removed reassemble the shifter cable as removed in
Step 27 & 28.
62. Also reinstall the battery tray and front grill with the factory
hardware.
63. Install the tires and wheels.
64. Jack up the front of the vehicle and remove the jack
stands.
65. Lower the vehicle to the ground.
66. Tighten the lower control arms using a 18mm socket /
wrench.
67. Tighten the upper control arms using a 18mm socket /
wrench.
68. The torsion bars will be adjusted to level the vehicle from front to back after the rear shackles are installed.
INSTALL THE SHOCK ABSORBER
PHOTO 42
See also other documents in the category Rough Country For the car:
- PERF689 (12 pages)
- 1308 (4 pages)
- 576.20 (16 pages)
- 1010 (4 pages)
- 787.22 (14 pages)
- 282 (14 pages)
- 1098 (1 page)
- 598S (17 pages)
- 379.22 (8 pages)
- 1051 (1 page)
- 392.24 (6 pages)
- 1109 (2 pages)
- 1011 (4 pages)
- 263.22 (9 pages)
- 7599 (4 pages)
- 1169 (2 pages)
- 87496 (4 pages)
- 288.20 (8 pages)
- 324S (20 pages)
- 283N2 (2 pages)
- PERF677 (8 pages)
- 699 (2 pages)
- 1305 (4 pages)
- 774S (10 pages)
- 1403 (2 pages)
- 9219 (2 pages)
- 1186 (1 page)
- 592.20 (8 pages)
- 1113 (2 pages)
- 563.20 (8 pages)
- 1054 (4 pages)
- 479.20 (8 pages)
- 87349 (2 pages)
- 280N2 (12 pages)
- 1021 (4 pages)
- RC0342 (2 pages)
- 3592 (2 pages)
- 1776 (1 page)
- 1182 (1 page)
- 1040 (2 pages)
- 561.20 (4 pages)
- 1117 (4 pages)
- 75113-15 (16 pages)
- PERF662X (8 pages)
- 1156 (2 pages)