Rough Country 242N2 User Manual
Page 5
25. Remove the wire pin from the actuator. Do not cut or damage this clip. See Photo 19.
26. Remove the cable from the mount by pressing the tabs in and pulling the cable out of mount. See Photo 20.
27. Remove the front drive shaft bolts from the differential using a 11mm socket. See Photo 21.
28. Support the differential with a floor jack.
29. Remove the lower differential hardware as shown in Photo 22 using a 18mm socket/ wrench. Retain the factory
hardware.
30. Remove the Driver upper differential hardware using a 18mm. See Photo 23.
31. Remove the plug from the diff and remove the plug clip using a 7mm socket. See Photo 24.
REMOVE THE CABLE (CABLE SHIFT)
REMOVE THE DRIVE SHAFT HARDWARE
REMOVE THE LOWER DIFF HARDWARE
REMOVE THE UPPER DIFF HARDWARE
REMOVE THE PLUG AND BRACKET
PHOTO 19
PHOTO 20
PHOTO 21
PHOTO 22
PHOTO 23
PHOTO 24
REMOVE THE WIRE PIN (CABLE SHIFT)
- PERF689 (12 pages)
- 1308 (4 pages)
- 576.20 (16 pages)
- 1010 (4 pages)
- 787.22 (14 pages)
- 282 (14 pages)
- 1098 (1 page)
- 598S (17 pages)
- 379.22 (8 pages)
- 1051 (1 page)
- 392.24 (6 pages)
- 1109 (2 pages)
- 1011 (4 pages)
- 263.22 (9 pages)
- 7599 (4 pages)
- 1169 (2 pages)
- 87496 (4 pages)
- 288.20 (8 pages)
- 324S (20 pages)
- 283N2 (2 pages)
- PERF677 (8 pages)
- 699 (2 pages)
- 1305 (4 pages)
- 774S (10 pages)
- 1403 (2 pages)
- 9219 (2 pages)
- 1186 (1 page)
- 592.20 (8 pages)
- 1113 (2 pages)
- 563.20 (8 pages)
- 1054 (4 pages)
- 479.20 (8 pages)
- 87349 (2 pages)
- 280N2 (12 pages)
- 1021 (4 pages)
- RC0342 (2 pages)
- 3592 (2 pages)
- 1776 (1 page)
- 1182 (1 page)
- 1040 (2 pages)
- 561.20 (4 pages)
- 1117 (4 pages)
- 75113-15 (16 pages)
- PERF662X (8 pages)
- 1156 (2 pages)