Rough Country 242N2 - Manual (Page 12)

MAINTENANCE INFORMATION
• If adjustment of the front end is needed. Jack up the front of the vehicle and adjust the torsion bar bolts to desired
height.
• Have vehicle aligned to factory specifications and adjust headlights.
• It is the ultimate buyers responsibility to have all bolts/nuts checked for tightness after the first 100 miles and then
every 1000 miles. Wheel alignment steering system, suspension and driveline systems must be inspected by a
qualified professional mechanic at least every 3000 miles
KIT CONTENTS:
1-Dr side control arm
1-Pass side control arm
2-Torsion bar keys
1-Dr Side Diff Bracket
1-Pass Side Diff Bracket
2-Rear lifted Shackles
1-Dr Side Rear Sway Bar Bracket
1-Pass Side Sway Bar Bracket
2—N2.0 FR Shocks-658697
2—N2.0 Rr Shocks-658692
KIT BAGS:
1-242N2 Bag1
2-Diff Bracket Bushings
1-Diff Bracket Bushing Sleeve
2-8mmx 25mm Bolt
2-8mm Flat Washers
1-8mm x 30mm Conical Bolt
1-12mm x 50mm Bolt
2-3/8” Lock Washers
2-3/8” Nuts
2-1/4” Flat Washers
2-1/4” Lock Nuts
4-1/2” x 1 1/4” Bolts
4-1/2” Flat Washers
4-1/2” Lock Nuts
1-242N2 Bag2 Inst sheet Bag
1-242N2 Bag3 Shock Bag
2-Fr Upper Shock Sleeves
4-Fr and Rear Lower Shock Sleeves
Drivers Side Arm
Passenger Side Arm
Driver Diff Brkt
Pass Diff Brkt
Torsion Keys
Rr Sway Bar Brkts
Rr Shackle
Rr Shocks
Fr Shocks