Printronix N7000 H-Series Cartridge Ribbon Printer - Manual (Page 26)

26
Chapter 3 The Control Panel
Cancel a Print Job
The procedure to cancel a print job depends on the printer emulation and your
application software. Contact your system administrator for additional
information.
1. If the printer is online, press ( ON LINE/CLEAR) to place the printer in
offline mode.
2. From the host system, stop the print job.
NOTE: If the print job is not stopped from the host system before pressing
( CANCEL), the print job continues with data missing when the
printer returns to online mode. Exercise caution to prevent unwanted
data loss occurrences, as this function deletes unprinted data in the
printer. This function is active only in offline mode; the purpose of this
function is to eliminate the necessity of printing unwanted data when
print jobs are canceled.
3. Press ( CANCEL).
NOTE: You may need to enable the Cancel option on the front panel.
See “ADVANCED USER” on page 148 for details.
4. Set the top-of-form. Refer to the Quick Reference Guide .