Printronix N7000 H-Series Cartridge Ribbon Printer - Manual (Page 106)

106
Chapter 4 LinePrinter+ Emulation (N7000 STD)
Epson FX Emulation
Define CR Code
The Define CR Code option controls the action of the printer when it receives
a Carriage Return code (hex 0D) from the host computer. If this feature is
enabled, each time the printer receives a carriage return, it inserts an
additional Line Feed code (hex 0A) into the data stream. Do not use this
feature if the host computer sends line feeds to the printer.
• CR = CR (default). Does not insert an extra line feed after each carriage
return.
• CR = CR + LF . Inserts an extra line feed after each carriage return.
Auto LF
This option defines the printer actions when print data is received past the
forms width setting.
• Enable (default). Performs an automatic carriage return and line feed
when data is received past the forms width.
• Disable . Discards any data past the forms width.
Define LF Code
The Define LF Code option controls the action of the printer when it receives a
Line Feed code (hex 0A) from the host computer. If this feature is enabled,
each time the printer receives a Line Feed, it inserts an additional Carriage
Return code (hex 0D) into the data stream. This feature is required if the host
computer does not send carriage returns to the printer.
• LF = LF (default). Does not add a carriage return with a line feed.
• LF = CR + LF . Adds an extra carriage return with each line feed.
Printer
Protocol
(from page 86)
Define CR
Code
Auto LF Define LF
Code
Printer
Select
Character
Set
20 CPI
Condensed
Alt. Set
80-9F
CR = CR*
CR = CR + LF
Enable*
Disable
LF = LF*
LF = CR + LF
Disable*
Enable
(see page 108) Enable*
Disable
Control Code*
Printable
* = Factory Default
Epson FX