Printronix N7000 H-Series Cartridge Ribbon Printer - Manual (Page 117)

OKI Menu
117
OKI Menu
Define CR Code
The Define CR Code option controls the action of the printer when it receives
a Carriage Return code (hex 0D) from the host computer. If this feature is
enabled, each time the printer receives a Carriage Return, it inserts an
additional Line Feed code (hex 0A) into the data stream. Do not use this
feature if the host computer sends Line Feeds to the printer.
• CR = CR . Does not insert an extra Line Feed after each Carriage Return.
• CR = CR + LF . Inserts an extra Line Feed after each Carriage Return.
Auto LF
This option defines the printer actions when print data is received past the
forms width setting.
• Enable . Performs an automatic carriage return and line feed when data is
received past the forms width.
• Disable . Discards any data past the forms width.
OFFLINE
Define CR
Code
Auto LF Define LF
Code
Printer Select
CR = CR*
CR = CR + LF
Enable*
Disable
LF = CR + LF*
LF = LF
Disable*
Enable
EMULATION
LinePrinter+
Printer
Protocol
OKI
(from page 110)
Character
Set
HS ANK 1*
HD ANK 1
HS ANK 2
HD ANK 2
* = Factory Default