Printronix N7000 H-Series Cartridge Ribbon Printer - Manual (Page 11)

11
Consumable Monitoring with PrintNet Enterprise
The Integrated Print Management System works with PrintNet Enterprise
(PNE). PNE allows a system administrator to remotely view the current
consumable status of all printers. PNE can be configured to deliver alerts on
all consumable warnings. When a ribbon reaches the low state, PNE notifies
the system administrator remotely via an automated e-mail alert of the low
condition. This allows corrective action to be taken before the ribbon reaches
its end of life. If the ribbon is not changed, an alert will again be initiated once
the ribbon reaches the 0% end point. Refer to your PrintNet Enterprise
Remote Management Software manual for details.
Graphics Enhancements
The IGP/PGL and IGP/VGL emulations allow you to create and store forms,
generate logos, bar codes, expanded characters, and create other graphics.
Alphanumeric and bar code data are added as the form is printed.
These emulations are available as factory-installed or field-installed options.
These emulations are not supported on H-Series printers.
For more information, contact your authorized service representative.
Taking Care of Your Printer
Your printer will produce high print quality jobs if it is well taken care of.
Periodic cleaning, handling the printer properly, and using the correct printer
supplies such as ribbon and paper ensures optimum performance. Chapter 7
explains how to clean the printer, and printer supplies are listed in
Appendix A.
Conventions in this Manual
All uppercase print indicates control panel keys.
Example: Press the CANCEL key, then press the ON LINE/CLEAR key.
Quotation marks (“ ”) indicate messages on the Liquid Crystal Display (LCD).
Example: Press the ON LINE/CLEAR key. “OFFLINE” appears on the LCD.
The + (plus) symbol represents key combinations.
Example: “Press  + ” means press the  (UP) key and the
 (DOWN) key at the same time.