Milton CAT 938K - Manual (Page 30)

Operating Specifications
Operating Specifications with High Dump Buckets
Pin On Fusion ISO 23727
924K 930K 938K 924K 930K 938K 924K 930K 938K
Rated capacity m 3 3.0 3.5 4.1 3.0 3.5 4.1 3.0 3.5 4.1
yd 3 3.9 4.6 5.4 3.9 4.6 5.4 3.9 4.6 5.4
Struck capacity m 3 2.9 3.3 3.9 2.9 3.3 3.9 2.9 3.3 3.9
yd 3 3.8 4.3 5.1 3.8 4.3 5.1 3.8 4.3 5.1
Bucket width mm 2550 2550 2750 2550 2550 2750 2550 2550 2750
ft/in 8'4" 8'4" 9'0" 8'4" 8'4" 9'0" 8'4" 8'4" 9'0"
Nominal material density, kg/m 3 1050 1015 1006 1020 992 976 980 953 947
100% fill factor lb/yd 3 1,780 1,702 1,684 1,730 1,663 1,634 1,662 1,598 1,585
1 Length: overall mm 7948 8005 8107 7979 8036 8149 8145 8202 8305
ft/in 26'0" 26'3" 26'7" 26'2" 26'4" 26'8" 26'8" 26'10" 27'2"
2 Dump clearance: full lift, mm 4255 4216 4248 4328 4291 4333 4496 4459 4494
rolled out ft/in 13'11" 13'9" 13'11" 14'2" 14'0" 14'2" 14'9" 14'7" 14'8"
3 Clearance: level bucket mm 4598 4598 4668 4662 4662 4740 4825 4825 4895
ft/in 15'1" 15'1" 15'3" 15'3" 15'3" 15'6" 15'9" 15'9" 16'0"
4 Height: overall mm 6184 6226 6295 6248 6290 6367 6411 6453 6523
ft/in 20'3" 20'5" 20'7" 20'5" 20'7" 20'10" 21'0" 21'2" 21'4"
5 Reach: full lift, rolled out mm 1451 1482 1548 1453 1486 1559 1538 1571 1637
ft/in 4'9" 4'10" 5'0" 4'9" 4'10" 5'1" 5'0" 5'1" 5'4"
6 Dig depth mm 100 100 101 100 100 101 92 92 92
in 3.9" 3.9" 4" 3.9" 3.9" 4" 3.6" 3.6" 3.6"
Turning radius, bucket mm 6096 6113 6293 6087 6104 6286 6118 6136 6315
at carry ft/in 19'11" 20'0" 20'7" 19'11" 20'0" 20'7" 20'0" 20'1" 20'8"
7 Maximum dump angle deg 52 52 51 49 49 49 48 48 50
8 Rack angle at carry deg 43 43 43 45 45 45 43 43 43
Tipping load – straight, kg 7408 8405 9792 7235 8246 9545 6957 7932 9257
ISO 14397-1* lb 16,326 18,525 21,582 15,945 18,175 21,036 15,332 17,481 20,401
Tipping load – straight, kg 7716 8755 10 200 7536 8590 9942 7247 8262 9642
rigid tire** lb 17,006 19,296 22,481 16,609 18,932 21,912 15,971 18,210 21,251
Tipping load – full turn, kg 6299 7107 8253 6122 6941 8007 5883 6672 7766
ISO 14397-1* lb 13,882 15,662 18,189 13,492 15,299 17,647 12,965 14,705 17,115
Tipping load – full turn, kg 6701 7560 8780 6513 7385 8518 6258 7098 8262
rigid tire** lb 14,768 16,662 19,350 14,353 16,275 18,774 13,793 15,644 18,208
Breakout force kg 6509 8225 9066 6420 8126 8895 5657 7220 7988
lb 14,346 18,128 19,980 14,149 17,909 19,604 12,467 15,913 17,605
Operating weight kg 13 258 14 281 16 252 13 602 14 625 16 648 13 540 14 564 16 537
lb 29,220 31,474 35,820 29,978 32,232 36,691 29,842 32,098 36,448
High Lift
924K 930K 938K
– – –
– – –
– – –
– – –
– – –
– – –
– – –
– – –
+642 +793 +740
+2'1" +2'7" +2'5"
+439 +567 +545
+1'5" +1'10" +1'9"
+448 +572 +553
+1'5" +1'10" +1'9"
+448 +572 +553
+1'5" +1'10" +1'9"
+252 +327 +275
+9" +1'0" +10"
+35 +35 +35
+1.4" +1.4" +1.4"
+333 +405 +378
+1'1" +1'3" +1'2"
– – –
– – –
–1830 –2376 –2571
–4,032 –5,235 –5,666
–1906 –2474 –2678
–4,200 –5,453 –5,902
–1617 –2088 –2250
–3,562 –4,601 –4,959
–1720 –2221 –2394
–3,790 –4,895 –5,275
–374 –225 –393
–824 –496 –865
+299 +247 +249
+659 +544 +549
*Full compliance to ISO 14397-1 (2007) Sections 1 through 6, which requires 2% verification between calculation and testing.
** Compliance to ISO 14397-1 (2007) Sections 1 through 5.
Dimensions listed are for a machine configured with rollout bucket, counterweights, additional guarding, 80 kg (176 lb) operator,
and Michelin 20.5 R25 (L-3) XHA2 tires.
30