Milton CAT TL1255 - Manual

Engine
Model Cat ® C4.4 EDITAAC
Gross Power (Basic) 105.1 kW 141 hp
Net Power (Basic) 100.6 kW 134.9 hp
• Net Power shown is the power available at the flywheel
when equipped with fan, air cleaner, muffler, and alternator.
Weights
Operating Weight 16 168 kg 35,650 lb
Operating Specifications
Rated Load Capacity 5443 kg 12,000 lb
Maximum Lift Height 16.6 m 54.3 ft
Maximum Forward Reach 13 m 42.5 ft
Frame Leveling 10°
Top Travel Speed 30.4 kph 18.9 mph
Capacity at Max Height (o/r Up) 1814 kg 4,000 lb
Capacity at Max Height (o/r Down) 2268 kg 5,000 lb
Capacity at Max Reach (o/r Up) — —
Capacity at Max Reach (o/r Down) 1587 kg 3,500 lb
Turning Radius over Tires 4.3 m 14 ft
Hydraulic System — Implement
Gear Pump Load sensing piston pump
System Operating Pressure 252 bar 3,650 psi
Auxiliary Hydraulic Pressure 207 bar 3,000 psi
Auxiliary Hydraulic Flow 57 L/min 15 gal/min
at Boom Head
• Auxiliary Hydraulic Circuit used for all attachments equipped
with cylinders or other hydraulic components. Consists of valves,
controls, and hydraulic lines.
Service Refill Capacities
Fuel Tank 144 L 38 gal
Hydraulic System 227.1 L 60 gal
Tires
Standard 17.5 x 25-12 PR
Optional 17.5 x 25 Foam Filled
17.5 x 25 Rock Lug
14.00 x 24 Solid
Transmission Speeds
Forward 4 speed
Reverse 3 speed
Boom Performance
Boom Up 15.7 Seconds
Boom Down 13.9 Seconds
Tele In 13.9 Seconds
Tele Out 17.6 Seconds
Drawbar Pull (Loaded) 88.96 kN 20,000 lb
Axles
• Trunnion mounted planetary 55 degree steer axles.
• Integral steer cylinder.
• High bias limited slip differential on front axle.
Brakes
• Service Brakes are inboard wet disc brakes on front and rear axles.
• Parking Brakes are mechanical on front axle.
Light on dash indicates when brake is on.
Instruments
• Volt meter, hourmeter, engine oil pressure gauge, fuel gauge, water
temperature gauge. All gauges protected by clear acrylic cover.
Work Tools
Hydraulic Includes Includes
IT Coupler Auxiliary Electrics Auxiliary Electrics
Pallet Forks (2) 1524 mm, (2) 60 in, 2.36 in x 6 in
60 mm x 152 mm
(2) 1219 mm, (2) 48 in, 2.36 in x 5 in
60 mm x 127 mm
Cubing Forks (2) 1219 mm, (2) 48 in, 2 in x 2 in
51 mm x 51 mm
Standard Tilt 1270 mm 50 in
Carriage
Wide Tilt Carriage 1829 mm
72 in
Standard Rotate 1270 mm 50 in
Carriage
Wide Rotate
1829 mm 72 in
Carriage
Swing Carriage
100°, 1829 mm, 4536 kg 100°, 72 in, 10,000 lb
Capacity, 2268 kg Swung Capacity, 5,000 lb Swung
Side Shift Carriage 1.22 m 48 in
Work Platform
Specifications
Cat
®
TL1255
Telehandler