Milton CAT 938K - Manual (Page 19)

924K Operating Specifications with Buckets
High Lift
5.0 –
6.5 –
4.8 –
6.3 –
2750 –
9'0" –
658 –
1115 –
2479 +493
8'1" +1'7"
1286 +237
4'2" +9"
1588 +572
5'2" +1'10"
2815 +523
9'2" +1'8"
100 +35
3.9" +1.4"
7946 +642
26'0" +2'1"
5752 +493
18'10" +1'7"
6166 +311
20'2" +1'0"
7745 –2145
17,070 –4,726
8068 –2234
17,781 –4,923
6577 –1892
14,496 –4,170
6997 –2013
15,421 –4,436
6611 –494
14,571 –1,089
13 480 +299
29,709 +659
Pin On
Light Material
3.5 4.2 5.0
4.6 5.5 6.5
3.3 4.0 4.8
4.3 5.2 6.3
2750 2750 2750
9'0" 9'0" 9'0"
1030 829 693
1,727 1,395 1174
2629 2509 2509
8'7" 8'2" 8'2"
1137 1257 1257
3'8" 4'1" 4'1"
1538 1579 1579
5'0" 5'2" 5'2"
2603 2773 2773
8'6" 9'1" 9'1"
100 100 100
3.9" 3.9" 3.9"
7734 7904 7904
25'4" 25'11" 25'11"
5284 5445 5725
17'4" 17'10" 18'9"
6099 6152 6152
20'0" 20'2" 20'2"
8418 8149 8116
18,553 17,959 17,887
8769 8488 8454
19,326 18,708 18,632
7210 6962 6927
15,890 15,343 15,267
7670 7406 7369
16,905 16,322 16,242
7888 6893 6842
17,385 15,192 15,080
12 925 13 062 13 132
28,487 28,789 28,943
Fusion
Rated capacity m 3 3.5 4.2
yd 3 4.6 5.5
Struck capacity m 3 3.3 4.0
yd 3 4.3 5.2
Width: bucket mm 2750 2750
ft/in 9'0" 9'0"
Nominal material density, 100% fill factor kg/m 3 979 787
lb/yd 3 1,642 1,324
Clearance: full lift, 45° dump mm 2600 2479
ft/in 8'6" 8'1"
Reach: full lift, 45° dump mm 1166 1286
ft/in 3'9" 4'2"
Reach: 2130 mm (7'0") clearance, 45° dump mm 1549 1588
ft/in 5'0" 5'2"
Reach: level arm, level bucket mm 2645 2815
ft/in 8'8" 9'2"
Dig depth mm 100 100
in 3.9" 3.9"
Length: overall mm 7776 7946
ft/in 25'6" 26'0"
Height: overall mm 5309 5471
ft/in 17'5" 17'11"
Turning radius, bucket at carry mm 6112 6166
ft/in 20'0" 20'2"
Tipping load – straight, ISO 14397-1* kg 8040 7776
lb 17,720 17,138
Tipping load – straight, rigid tire** kg 8375 8100
lb 18,459 17,852
Tipping load – full turn, ISO 14397-1* kg 6853 6609
lb 15,104 14,567
Tipping load – full turn, rigid tire** kg 7291 7031
lb 16,068 15,497
Breakout force kg 7603 6660
lb 16,757 14,678
Operating weight kg 13 275 13 415
lb 29,258 29,566
*Full compliance to ISO 14397-1 (2007) Sections 1 through 6, which requires 2% verification between calculation and testing.
** Compliance to ISO 14397-1 (2007) Sections 1 through 5.
Dimensions listed are for a 924K configured with bucket, bolt-on cutting edge, standard counterweights, additional guarding, 80 kg (176 lb)
operator, and Michelin 20.5 R25 (L-3) XHA2 tires at a pressure of 4.14 bar (60 psi) in the front tires and 2.76 bar (40 psi) in the rear tires.
19