Milton CAT 938K - Manual (Page 28)

Operating Specifications
Operating Specifications with Construction Forks
9
8
5
10
7
3
2
1 4
6
13
11
12
Construction Fork – Fusion
924K 930K 938K
1 Fork tine length 1524 mm 5'0" 1524 mm 5'0" 1524 mm 5'0"
2 Load center 762 mm 2'6" 762 mm 2'6" 762 mm 2'6"
3 Length: overall 8298 mm 27'2" 8305 mm 27'2" 8366 mm 27'5"
4 Reach: ground 1045 mm 3'5" 1045 mm 3'5" 1081 mm 3'6"
5 Dig depth –120 mm –4.7" –120 mm –4.7" –119 mm –4.7"
6 Reach: level arm 1627 mm 5'4" 1627 mm 5'4" 1675 mm 5'5"
7 Reach: full lift 825 mm 2'8" 825 mm 2'8" 872 mm 2'10"
8 Clearance: level arm 1729 mm 5'8" 1729 mm 5'8" 1766 mm 5'9"
9 Clearance: full lift 3630 mm 11'10" 3630 mm 11'10" 3693 mm 12'1"
10 Height: overall 4935 mm 16'2" 4935 mm 16'2" 0 mm 0"
Tipping load – straight, ISO 14397-1* 5951 kg 13,115 lb 6824 kg 15,039 lb 7973 kg 17,571 lb
Tipping load – full turn, ISO 14397-1* 5096 kg 11,231 lb 5817 kg 12,821 lb 6781 kg 14,945 lb
Operating weight 12 911 kg 28,456 lb 13 829 kg 30,478 lb 15 767 kg 34,749 lb
Rated load % of full turn tip:
50% of tip: SAE J1197** 2548 kg 5,615 lb 2909 kg 6,410 lb 3391 kg 7,472 lb
60% of tip: rough terrain EN474-3** 3058 kg 6,738 lb 3490 kg 7,692 lb 4069 kg 8,967 lb
80% of tip: firm and level EN474-3** 4077 kg 8,985 lb 4654 kg 10,256 lb 5425 kg 11,956 lb
11 Minimum fork spacing 300 mm 11" 300 mm 11" 300 mm 11"
12 Carriage width 2498 mm 8'2" 2498 mm 8'2" 2498 mm 8'2"
13 Maximum fork spacing 2375 mm 7'9" 2375 mm 7'9" 2375 mm 7'9"
*Full compliance to ISO 14397-1 (2007) Sections 1 through 6, which requires 2% verification between calculation and testing.
**Full compliance to EN474-3 and SAE J1197.
Dimensions listed are for a machine configured with Fusion work tool, counterweights, additional guarding, 80 kg (176 lb) operator,
and Michelin 20.5 R25 (L-3) XHA2 tires.
28