Milton CAT 938K - Manual (Page 17)

Dimensions with Bucket
High Lift
924K 930K 938K
** 1 Height: ground to cab 3340 mm 10'11" 3340 mm 10'11" 3340 mm 10'11"
** 2 Height: ground to beacon 3669 mm 12'0" 3669 mm 12'0" 3669 mm 12'0"
** 3 Height: ground axle center 685 mm 2'2" 685 mm 2'2" 685 mm 2'2"
** 4 Height: ground clearance 400 mm 1'3" 400 mm 1'3" 390 mm 1'3"
* 5 Length: overall 8093 mm 26'6" 8324 mm 27'3" 8397 mm 27'6"
6 Length: rear axle to bumper 1986 mm 6'6" 1993 mm 6'6" 1968 mm 6'5"
7 Length: hitch to front axle 1500 mm 4'11" 1500 mm 4'11" 1525 mm 5'0"
8 Length: wheel base 3000 mm 9'10" 3000 mm 9'10" 3050 mm 10'0"
* 9 Clearance: bucket at 45° 3378 mm 11'0" 3421 mm 11'2" 3415 mm 11'2"
** 10 Clearance: load over height 3550 mm 11'7" 3540 mm 11'7" 3561 mm 11'8"
** 11 Clearance: level bucket 4073 mm 13'4" 4173 mm 13'8" 4222 mm 13'10"
** 12 Height: bucket pin 4400 mm 14'5" 4500 mm 14'9" 4550 mm 14'11"
** 13 Height: overall 5569 mm 18'3" 5740 mm 18'9" 5853 mm 19'2"
* 14 Reach: bucket at 45° 1261 mm 4'1" 1385 mm 4'6" 1413 mm 4'7"
15 Carry height: bucket pin 649 mm 2'1" 692 mm 2'3" 686 mm 2'2"
** 16 Dig depth 135 mm 5.3" 135 mm 5.3" 135 mm 5.3"
17 Width: bucket 2550 mm 8'4" 2550 mm 8'4" 2750 mm 9'0"
18 Width: tread center 1930 mm 6'3" 1930 mm 6'3" 2065 mm 6'9"
19 Turning radius: over bucket 6234 mm 20'5" 6329 mm 20'9" 6490 mm 21'3"
20 Width: over tires 2540 mm 8'4" 2540 mm 8'4" 2675 mm 8'9"
21 Turning radius: outside of tires 5402 mm 17'8" 5402 mm 17'8" 5537 mm 18'1"
22 Turning radius: inside of tires 2851 mm 9'4" 2851 mm 9'4" 2852 mm 9'4"
23 Rack angle at full lift 51° 53° 53°
24 Dump angle at full lift 49° 48° 47°
25 Rack angle at carry 49° 50° 50°
26 Departure angle 33° 33° 33°
27 Articulation angle 40° 40° 40°
Operating weight 13 166 kg 29,018 lb 14 077 kg 31,024 lb 16 177 kg 35,653 lb
*Vary with bucket.
**Vary with tire.
Dimensions listed are for a machine configured with general purpose Fusion bucket, bolt-on cutting edge, counterweights,
additional guarding, 80 kg (176 lb) operator and Michelin 20.5 R25 (L-3) XHA2 tires.
Supplemental Operating Data – Tires
924K 930K 938K
550/65 R25 17.5 R25 (L-2) 600/65 R25 20.5R25 (L-5) 650/65 R25 Flexport (Gen II)
mm in mm in mm in mm in mm in mm in
Vertical heights –70 –2.8" –99 –3.9" –55 –2.2" +15 +0.6" –35 –1.4" +59 +2.3"
Reach: bucket at 45° +43 +1.7" +75 +3" +29 +1.1" –21 –0.8" –5 –0.2" –23 –0.9"
Width: over tires +21 +0.8" –69 –2.7" +98 +3.9" 0 0" +121 +4.8" +65 +2.6"
Turning radius: outside of tires +4 +0.2" –45 –1.8" +42 +1.7" +1 0" +53 +2.1" +61 +2.4"
Turning radius: inside of tires –11 –0.4" 35 +1.4" –49 –1.9" 0 0" –61 –2.4" –33 –1.3"
kg lb kg lb kg lb kg lb kg lb kg lb
Tipping load – straight –83 –182 –348 –767 +9 +19 +444 +978 +137 +301 +1864 +4,108
Tipping load – full turn –72 –157 –301 –663 +8 +17 +384 +846 +118 +260 +1612 +3,552
Operating weight –126 –277 –530 –1,167 +14 +30 +678 +1,494 +210 +462 +2866 +6,316
17