Milton CAT 938K - Manual (Page 16)

924K, 930K, 938K Wheel Loader Specifications
Dimensions with Bucket
All dimensions are approximate. Dimensions will vary with bucket and tire choice. Refer to Operating Specifications with Buckets.
2
1
6
8
16
9
11
12
13
10
14
7
5
23
24
25
15 4
26 3
19
21
22
20
18
27
17
Standard Lift
924K 930K 938K
** 1 Height: ground to cab 3340 mm 10'11" 3340 mm 10'11" 3340 mm 10'11"
** 2 Height: ground to beacon 3669 mm 12'0" 3669 mm 12'0" 3669 mm 12'0"
** 3 Height: ground axle center 685 mm 2'2" 685 mm 2'2" 685 mm 2'2"
** 4 Height: ground clearance 400 mm 1'3" 400 mm 1'3" 390 mm 1'3"
* 5 Length: overall 7451 mm 24'5" 7530 mm 24'8" 7656 mm 25'1"
6 Length: rear axle to bumper 1986 mm 6'6" 1993 mm 6'6" 1968 mm 6'5"
7 Length: hitch to front axle 1500 mm 4'11" 1500 mm 4'11" 1525 mm 5'0"
8 Length: wheel base 3000 mm 9'10" 3000 mm 9'10" 3050 mm 10'0"
* 9 Clearance: bucket at 45° 2885 mm 9'5" 2828 mm 9'3" 2834 mm 9'3"
** 10 Clearance: load over height 3330 mm 10'11" 3331 mm 10'11" 3354 mm 11'0"
** 11 Clearance: level bucket 3580 mm 11'8" 3580 mm 11'8" 3641 mm 11'11"
** 12 Height: bucket pin 3907 mm 12'9" 3907 mm 12'9" 3969 mm 13'0"
** 13 Height: overall 5076 mm 16'7" 5147 mm 16'10" 5273 mm 17'3"
* 14 Reach: bucket at 45° 1024 mm 3'4" 1064 mm 3'5" 1146 mm 3'9"
15 Carry height: bucket pin 458 mm 1'6" 458 mm 1'6" 467 mm 1'6"
** 16 Dig depth 100 mm 3.9" 100 mm 3.9" 101 mm 3.9"
17 Width: bucket 2550 mm 8'4" 2550 mm 8'4" 2750 mm 9'0"
18 Width: tread center 1930 mm 6'3" 1930 mm 6'3" 2065 mm 6'9"
19 Turning radius: over bucket 5924 mm 19'5" 5945 mm 19'6" 6133 mm 20'1"
20 Width: over tires 2540 mm 8'4" 2540 mm 8'4" 2675 mm 8'9"
21 Turning radius: outside of tires 5402 mm 17'8" 5402 mm 17'8" 5537 mm 18'1"
22 Turning radius: inside of tires 2851 mm 9'4" 2851 mm 9'4" 2852 mm 9'4"
23 Rack angle at full lift 54° 54° 54°
24 Dump angle at full lift 50° 49° 49°
25 Rack angle at carry 45° 45° 45°
26 Departure angle 33° 33° 33°
27 Articulation angle 40° 40° 40°
Operating weight 12 868 kg 28,360 lb 13 829 kg 30,479 lb 15 928 kg 35,104 lb
*Vary with bucket.
**Vary with tire.
Dimensions listed are for a machine configured with general purpose Fusion bucket, bolt-on cutting edge, counterweights,
additional guarding, 80 kg (176 lb) operator and Michelin 20.5 R25 (L-3) XHA2 tires.
16