Milton CAT 938K - Manual (Page 22)

Bucket Specifications
930K Operating Specifications with Buckets
Light Material
Pin On
3.5 4.2 5.0 3.5
4.6 5.5 6.5 4.6
3.3 4.0 4.8 3.3
4.3 5.2 6.3 4.3
2750 2750 2750 2750
9'0" 9'0" 9'0" 9'0"
1176 948 793 1123
1972 1,596 1,345 1883
2629 2509 2509 2600
8'7" 8'2" 8'2" 8'6"
1137 1257 1257 1166
3'8" 4'1" 4'1" 3'9"
1538 1579 1579 1549
5'0" 5'2" 5'2" 5'0"
2603 2773 2773 2645
8'6" 9'1" 9'1" 8'8"
100 100 100 100
3.9" 3.9" 3.9" 3.9"
7741 7911 7911 7783
25'4" 25'11" 25'11" 25'6"
5284 5445 5725 5309
17'4" 17'10" 18'9" 17'5"
6099 6152 6152 6112
20'0" 20'2" 20'2" 20'0"
9652 9365 9334 9259
21,273 20,640 20,572 20,406
10 054 9755 9723 9645
22,159 21,500 21,429 21,256
8230 7966 7934 7860
18,138 17,557 17,486 17,323
8755 8475 8440 8362
19,296 18,678 18,602 18,429
10 277 9020 8969 9921
22,649 19,879 19,767 21,864
13 842 13 979 14 049 14 192
30,508 30,810 30,965 31,280
Fusion
Rated capacity m 3 4.2 5.0
yd 3 5.5 6.5
Struck capacity m 3 4.0 4.8
yd 3 5.2 6.3
Width: bucket mm 2750 2750
ft/in 9'0" 9'0"
Nominal material density, 100% fill factor kg/m 3 905 757
lb/yd 3 1,523 1,284
Clearance: full lift, 45° dump mm 2479 2479
ft/in 8'1" 8'1"
Reach: full lift, 45° dump mm 1286 1286
ft/in 4'2" 4'2"
Reach: 2130 mm (7'0") clearance, 45° dump mm 1588 1588
ft/in 5'2" 5'2"
Reach: level arm, level bucket mm 2815 2815
ft/in 9'2" 9'2"
Dig depth mm 100 100
in 3.9" 3.9"
Length: overall mm 7953 7953
ft/in 26'1" 26'1"
Height: overall mm 5471 5752
ft/in 17'11" 18'10"
Turning radius, bucket at carry mm 6166 6166
ft/in 20'2" 20'2"
Tipping load – straight, ISO 14397-1* kg 8977 8948
lb 19,785 19,722
Tipping load – straight, rigid tire** kg 9351 9321
lb 20,609 20,543
Tipping load – full turn, ISO 14397-1* kg 7602 7571
lb 16,754 16,687
Tipping load – full turn, rigid tire** kg 8087 8055
lb 17,823 17,752
Breakout force kg 8730 8682
lb 19,240 19,134
Operating weight kg 14 332 14 397
lb 31,587 31,731
*Full compliance to ISO 14397-1 (2007) Sections 1 through 6, which requires 2% verification between calculation and testing.
** Compliance to ISO 14397-1 (2007) Sections 1 through 5.
Dimensions listed are for a 930K configured with bucket, bolt-on cutting edge, heavy counterweights, additional guarding, 80 kg (176 lb)
operator, and Michelin 20.5 R25 (L-3) XHA2 tires at a pressure of 4.14 bar (60 psi) in the front tires and 2.76 bar (40 psi) in the rear tires.
High Lift
–
–
–
–
–
–
–
–
+593
+1'11"
+320
+1'0"
+717
+2'4"
+653
+2'1"
+35
+1.4"
+794
+2'7"
+593
+1'11"
+384
+1'3"
–2795
–6,160
–2912
–6,417
–2452
–5,404
–2609
–5,749
–299
–658
+247
+544
22