Milton CAT 938K - Manual (Page 23)

930K Bucket Selection Table
Bucket kg/m 3 2200 1375 1450 1525 1600 1675 1750 1825 1900 1975 2050 2125
2,317 2,443 2,570 2,696 2,822 2,949 3,075 3,202 3,328 3,454 3,581
m 3 yd 3 kg/m 3 lb/yd 3
General Purpose
114% 110% 105% 102% 98%
112% 108% 103% 99% 95%
112% 107% 102% 98%
114% 109% 105% 101% 97%
113% 108% 103% 99% 95%
112% 107% 102% 97%
High Lift
Fill Factor
lb/yd 3 3,707
2.1 2.7 –588 –992
Pin On 2.3 3.0 –533 –898
2.5 3.3 –487 –821
2.1 2.7 –580 –977
Fusion 2.3 3.0 –525 –885
2.5 3.3 –480 –809
700 750 800 850 900 950 1000 1050 1100 1150
1,180 1,264 1,348 1,432 1,517 1,601 1,685 1,769 1,854 1,938
m 3 yd 3 kg/m 3 lb/yd 3
Light Material
112% 107% 102% 98% 94%
113% 106% 99%
112% 107% 102% 98%
113% 106% 101% 95%
108% 101% 95%
112% 105% 100% 95%
Bucket kg/m 3 1200 1250
High Lift
Fill Factor lb/yd 3 2,022 2,106
3.5 4.6 –341 –575
Pin On 4.2 5.5 –278 –468
5.0 6.5 –234 –395
3.5 4.6 –337 –568
Fusion 4.2 5.5 –274 –462
5.0 6.5 –231 –389
Material density and fill factor are key variables when choosing the appropriate size of the bucket. The long floor and open throat design
of the Performance Series Buckets along with the aggressive rack angles of the optimized K Series linkage will demonstrate fill factors greater
than 100% ISO rated. Refer to the Fill Factors table for expected fill factor per material density and Bucket Selection Table for bucket sizing.
930K Fill Factors
Materials Density Fill %
Earth and rock ~ 1800 kg/m 3 ~ 3,033 lb/yd 3 ~ 115%
Sand and gravel ~ 1700 kg/m 3 ~ 2,865 lb/yd 3 ~ 110%
Aggregates ~ 1600 kg/m 3 ~ 2,696 lb/yd 3 ~ 105%
Bulk grains ~ 750 kg/m 3 ~ 1,264 lb/yd 3 ~ 100%
Woodchips ~ 500 kg/m 3 ~ 843 lb/yd 3 ~ 100%
930K Ground Engagement Options
Long Teeth and Segments Short Teeth and Segments
Dig depth +11 mm +0.4 in +5 mm +0.2 in
Length: overall +146 mm +5.7 in +121 mm +4.8 in
Dump clearance –104 mm –4.1 in –83 mm –3.3 in
Reach +103 mm +4.1 in +88 mm +3.5 in
Tipping load – straight –150 kg –329 lb –143 kg –315 lb
Tipping load – full turn –146 kg –322 lb –140 kg –309 lb
Breakout force –121 kg –266 lb –115 kg –254 lb
Operating weight +120 kg +264 lb +116 kg +255 lb
23