Milton CAT 938K - Manual (Page 14)

924K, 930K, 938K Wheel Loader Specifications
Transmission
*Creeper control allows maximum speed range adjustability from 1 km/h (0.6 mph)
to 13 km/h (8 mph) in Range 1 through the secondary display when equipped.
Factory default is 7 km/h (4.4 mph).
924K 930K 938K
Forward
Range 1* 1-13 km/h 0.6-8.0 mph 1-13 km/h 0.6-8.0 mph 1-13 km/h 0.6-8.0 mph
Range 2 13 km/h 8 mph 13 km/h 8 mph 13 km/h 8 mph
Range 3 27 km/h 17 mph 27 km/h 17 mph 27 km/h 17 mph
Range 4 40 km/h 25 mph 40 km/h 25 mph 40 km/h 25 mph
Reverse
Range 1* 1-13 km/h 0.6-8.0 mph 1-13 km/h 0.6-8.0 mph 1-13 km/h 0.6-8.0 mph
Range 2 13 km/h 8 mph 13 km/h 8 mph 13 km/h 8 mph
Range 3 27 km/h 17 mph 27 km/h 17 mph 27 km/h 17 mph
Range 4 40 km/h 25 mph 40 km/h 25 mph 40 km/h 25 mph
Power Train
• Power train is governed by the Caterpillar exclusive Intelligent Power Management system
to deliver peak performance and effi ciency.
** Differential front locking axle can be engaged on the go at full torque up to 10 km/h
(6.2 mph) on the 924K/930K and up to 20 km/h (12.4 mph) on the 938K.
924K 930K 938K
Front axle Fixed Fixed Fixed
Traction aid** Locking differential Locking differential Locking differential
standard standard standard
Rear axle Oscillating Oscillating Oscillating
Oscillation with 17.5 tires ± 13 degrees – –
Oscillation with 20.5 tires ± 11 degrees ± 11 degrees ± 11 degrees
Traction aid Limited slip differential Limited slip differential Limited slip differential
optional optional optional
Brakes
Service brakes Inboard wet disc Inboard wet disc Outboard wet disc
Park brake Spring applied Spring applied Spring applied
hydraulically released hydraulically released hydraulically released
14