beautypg.com

3 adjustment with minicom or vegamet, Indicating and adjustment surfaces of, Set-up – VEGA VEGAPULS 56V User Manual

Page 61

background image

VEGAPULS 56V

61

Indicating and adjustment surfaces of:

ESC

OK

-

+

1

2

on

100

%

CONNECT

515 V

Dependent on the menu point,
change the value or choose out of
the list

Choose menu window or shift
flashing cursor

Save the adjusted value or move
to the lower menu

Branch, i.e. jump to the
lower menu with [OK]

Interrupt adjustment
or move to the next
higher menu

Display,
indication of
- measured value
- menu point
- parameter
- value

Analogue
LED-indication
(0!…!100!%)

6.3 Adjustment with MINICOM or

VEGAMET

Beside the PC VEGAPULS 56V radar sen-
sors can be also adjusted
- with the detachable small adjustment mod-

ule MINICOM

- or with the signal conditioning instrument

VEGAMET.

For the adjustment with the signal condition-
ing instrument VEGAMET all adjustment op-
tions are available like with the PC. The
adjustment differs just in the appearance
however not in the functionality.

With the adjustment module MINICOM all
sensor relevant adjustments are possible
(adjustment, operating range, measuring
conditions, sensor indication scaling, lineari-
sation or false echo storage).

Not possible however are the adjustment
steps relating to the configuration of the sig-
nal conditioning instrument VEGAMET or the
processing system VEGALOG and their
signal processing (configuration of the inputs
and outputs, linearisation curves, simula-
tion…).

VEGAMET and MINICOM are adjusted with 6
keys. A small display gives beside the mea-
sured value a short feedback on the menu
point or the figure of a menu adjustment.

Although the information quantity of the small
display cannot be compared with the adjust-
ment program VVO, there will be no prob-
lems with the adjustment according to the
following menu plans of VEGAMET 515V and
MINICOM. Perhaps you will carry out your
adjustments more quickly and direct with the
6-key adjustment field than with the PC.

Note:
The menu plan to VEGAMET 514V is stated in
the operating instruction to VEGAMET 514V.

Signal conditioning
instrument VEGAMET

Adjustment module MINICOM

ESC

OK

Tank 1
m (d)
12.345

Set-up