VEGA VEGAPULS 56V - Manual (Page 53)

VEGAPULS 56V 53
As parameter you can choose "dimension-
less (figures), volume, mass, height and
distance“ and an appropriate unit (e.g. l. hl)
can then be coordinated to the parameter.
The sensor display shows then the figure in
the selected parameter and unit.
• Save the adjustments in the menu " Scaling“
with "OK“.
A warning is displayed that the indication was
previous adjusted to percent. Confirm the
adjustment to get the indication in liters. The
adjustments are now transferred to the sen-
sor and you are again in the menu window
"
Conditioning“.
• Click in the menu window " Conditioning“ to
"Quit“.
• Click in the menu window " Instrument data
parameter adjustment“ to "Quit“.
Linearisation
The relation of level and volume is described
in so called linearisation curves. When there
is another linear dependence in your vessel
between level (percentage value of the level)
and the volume (linearised value of the vol-
ume), choose the menu "
Instrument data/
Parameter adjustment/Conditioning“.
Set-up
The menu window " Conditioning“ opens.
Click to "Scaling“.
In the menu " Scaling“ you enter the actual
0 % and 100 %-values of the parameter and
their unit. You inform the sensor e.g. that
at␣ 0␣ %-filling there are still 45 l and at 100␣ %-
filling 1200 l in the vessel. The sensor display
shows with empty vessel 45 l (0␣ %) and with
full vessel 1200 l (100␣ %).