VEGA VEGAMET 515V - Manual (Page 44)

44 VEGAMET 515V
MET indication/PC/DCS outputs/DIS outputs
Parameter adjustment
MET indication/Unit:
In the menu item "prop. to“, you choose the
parameter to which the VEGAMET display
reacts (if you have carried out a scaling un-
der the menu item "Signal conditioning“,
"prop. to scaled“ will have been automatically
adjusted, i.e. the display will indicate the
scaled value). "Prop. to volume“ is then useful
if you have selected, for example, a spherical
tank or a user-programmable lin. curve under
"Signal conditioning - Linearisation curves“.
The indicated value on the VEGAMET display
then correlates proportionally to the volume of
the tank contents.
PC/DCS outputs and DIS outputs:
Adjustment according to the same procedure
as the MET indication.
Param.
TAG-
No. 1
Adjust-
ment Signal
condit-
ioning Out-
puts
Curr.
out-
puts Volt
out-
puts MET
display PC/
DCS
outputs DIS
outputs
DIS
output
1
PC/
DCS
output 1
Unit
0,0%
DIS
output
2 DIS
output
7
DCS
output
2 DCS
output
7
prop.
to
Per-
cent
Unit
0,0%
prop.
to
Per-
cent
Unit
0,0%
like DIS output 1
like DCS
output 1
TAG -
No. 1
%
xx,x
prop.
to
Per-
cent
Relay
out-
puts
scaled
Height
…
scaled
Height
…
scaled
Height
…