VEGA VEGAMET 515V - Manual (Page 19)

VEGAMET 515V 19
Offset correction
- with unpressurized sensor
- parallel shift of the adjust-
ment characteristics
Real value correction
- with available percentage
value
- parallel shift of the adjust-
ment characteristics
Density correction
- only in conjunction with
hydrostatic pressure
transmitters
- slope correction of the
adjustment characteristics
Offset correction
0
100%
0 100%
corrected measured value e.g. 0 %
Measured value too low
incorrect course of measured values
Measured value too high
actual measured value in %
Real value correction
Density correction
incorrect course of measured values
incorrect course of measured values
higher density,
measured value too high
lower density,
measured value too low
0
100%
0 40 100%
40
0
20
100%
0 20 100%
Measured value too low
Measured value too high
actual measured value in %
actual measured value in %
corrected measured value e.g. 20 %
corrected measured value e.g. 40 %
Pos. E
Pos. D
Configuration
Pos. A
Pos. D
Pos. A
Pos. A