VEGA VEGAMET 515V - Manual (Page 38)

38 VEGAMET 515V
>110 %
Parameter adjustment
7.7 Meas. value limitation
TAG-
No. 1
%
xx,x
Param.
TAG-
No. 1
Ad-
just-
ment Signal
condi-
tioning
Scal-
ing Lin.
curve
linear
Meas.
value
indication
Integr
ation
time s
0
Under "Meas. value limitation“ you can ex-
clude negative values on the display (and on
the outputs).
Failure mode standard
means that the fail safe relay responds at a
sensor current of 3.6 mA or 21 mA.
Failure mode > 110 %
generates an additional fault signal at a
measured value of more than 110 % or less
than -10 %.
Density
in
kg/dm3
1.000
Meas.
value
limita-
tion
nega-
tive
values
yes
Failure
mode
Stan-
dard
no