Veris Industries H8920-1 Install User Manual

Notice, Danger, Installation guide

Z202806-0H

PAGE 1

07111

Alta Labs, Enercept, Enspector, Hawkeye, Trustat, Veris, and the Veris ‘V’ logo are trademarks or registered trademarks of Veris Industries, L.L.C. in the USA and/or other countries.

POWER MONITORING

INSTALLATION GUIDE

H8920-1

Installer’s Specifications

LonWorks® Network

Free topology transceiver, 78 kbps

Modbus Network

RTU 9600 BAUD, 8N1 format

Network Variable Type

Float

Input Power

16-24 VAC/DC, 100mA (max.)

Temperature Range

0 to 60°C (32 to 140°F)

Humidity Range

0 - 95% non-condensing

DIMENSIONS

LONTalk Integration Node

For Use With Enercept H8036 Power Meters

HAZARD OF ELECTRIC SHOCK, EXPLOSION, OR ARC FLASH

• Follow safe electrical work practices.

See NFPA 70E in the USA, or applicable local codes.

• This equipment must only be installed and serviced by qualiﬁed electrical personnel.
• Read, understand and follow the instructions before installing this product.
• Turn oﬀ all power supplying equipment before working on or inside the equipment.
• Use a properly rated voltage sensing device to conﬁrm power is oﬀ.
DO NOT DEPEND ON THIS PRODUCT FOR VOLTAGE INDICATION
• Only install this product on insulated conductors.

Failure to follow these instructions will result in death or serious injury.

DANGER

NOTICE

• This product is not intended for life or safety applications.

• Do not install this product in hazardous or classiﬁed locations.

• The installer is responsible for conformance to all applicable codes.

• Mount this product inside a suitable ﬁre and electrical enclosure.

FCC PART 15 INFORMATION
NOTE: This equipment has been tested by the manufacturer and found

to comply with the limits for a class A digital device, pursuant to part
15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference when the equipment is
operated in a commercial environment. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed and
used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in
a residential area is likely to cause harmful interference in which case
the user will be required to correct the interference at his own expense.
Modiﬁcations to this product without the express authorization of
Veris Industries nullify this statement.

PRODUCT IDENTIFICATION

H8920-1

4.25"

(108 mm)

2.12

(54 mm)

1.16"

(30 mm)

4.25"

(108 mm)

1.53"

(39 mm)

Wire Opening

1.16"

(30 mm)

SERVICE

MODBUS

Hawkeye

8920 Series

METER DATA NETWORK VARIABLES

kWh, Consumption
kW, Real Power
kVAR, Reactive power
kVA, Apparent power
Power factor
kW, Average power
kW, Minimum power
kW, Maximum power
Voltage, line to line
Voltage, line to neutral

†

Amps, Average current
kW, Power ØA

†

kW, Power ØB

†

kW, Power ØC

†

Power factor ØA

†

Power factor ØB

†

Power factor ØC

†

Voltage, ØA to ØB
Voltage, ØB to ØC
Voltage, ØA to ØC
Voltage, ØA to Neutral

†

Voltage, ØB to Neutral

†

Voltage, ØC to Neutral

†

Amps, Current ØA
Amps, Current ØB
Amps, Current ØC
kW Max.
kW Min.
kW Average

†Based on derived neutral voltage

MODEL

DESCRIPTION

H8920-1

Enercept® H8036 to LonTalk® integration node