Velleman VMB1TC - Manual (Page 93)

VMB1TC Temperature controller manual – rev 5.0 93
Removing a program instruction
1. Press the ‘Location’ button repeatedly until the room
or zone of which the program instruction needs to be
changed is displayed.
2. Press and hold the ‘Menu’ button for ±4 seconds to
open the extended menu. Enter the PIN code if
necessary.
3. Select the program menu with the → button.
The display shows the first program instruction.
4. Scroll through the program using the ↑ or ↓ button
until the instruction that needs to be removed is
shown.
5. Select the instruction that needs to be deleted with
the → button.
The first data entry field flashes.
6. Use the ↑ button until the instruction line is empty.
7. Confirm with the → button.
The program instruction is removed from the
memory, the flashing cursor disappears and the next
program instruction is shown. If this was the last
instruction, the display remains empty.
8. Repeat steps 4 through 7 to remove other program
instructions or exit the menu using the 5 button.
Location
5
↑
↓
Menu
→
Mode
←
Living room
Program
Location
5
↑
↓
Menu
→
Mode
←
Living room
Mo 14:47 22
Location
5
↑
↓
Menu
→
Mode
←
Living room
--
Location
5
↑
↓
Menu
→
Mode
←
Living room
--
Location
5
↑
↓
Menu
→
Mode
←
Living room
Mo-Fr -30m
Location
5
↑
↓
Menu
→
Mode
←
Living room
Mo-Su 22:30
Location
5
↑
↓
Menu
→
Mode
←
Living room
_____ -30m