Setting the backlight of the display – Velleman VMB1TC User Manual
Page 45
VMB1TC Temperature controller manual – rev 5.0
45
Setting the backlight of the display
The backlight of the display can be changed automatically twice a day. When operating the controller the backlight
illumination is immediately set to maximum; after ± 1 minute of inactivity, the backlight will return to its original setting.
1. Press and hold the ‘Menu’ button for ±4 seconds to
open the extended menu.
2. Scroll through the extended menu using the ↑ or ↓
button until the ‘Display’ item appears
3. Select the display menu with the → button.
4. Scroll through the display menu using the ↑ or ↓
button until the ‘Backlight’ item appears.
5. Select the backlight menu with the → button.
6. Change the hour of the first time frame with the ↑ or
↓ button and confirm with the → button.
7. Change the minutes of the first time frame with the ↑
or ↓ button and confirm with the → button.
8. Set the brightness for the first time frame with the ↑
or ↓ button and confirm with the → button.
Location
5
↑
↓
Menu
→
Mode
←
Temp sensor 01
Location
5
↑
↓
Menu
→
Mode
←
Temp sensor 01
Program
Location
5
↑
↓
Menu
→
Mode
←
Temp sensor 01
Display
Location
5
↑
↓
Menu
→
Mode
←
Temp sensor 01
Contrast
Location
5
↑
↓
Menu
→
Mode
←
Temp sensor 01
Backlight
Location
5
↑
↓
Menu
→
Mode
←
Temp sensor 01
Location
5
↑
↓
Menu
→
Mode
←
Temp sensor 01
Location
5
↑
↓
Menu
→
Mode
←
Temp sensor 01