Velleman VMB1TC - Manual (Page 89)

VMB1TC Temperature controller manual – rev 5.0 89
Entering a new program instruction
1. Press the ‘Location’ button repeatedly until the room
or zone of which a program instruction needs to be
added is displayed.
2. Press and hold the ‘Menu’ button for ±4 seconds to
open the extended menu. Enter the PIN code if
necessary.
3. Select the program menu with the → button.
The display shows the first program instruction.
Remark:
When no instructions are entered yet, the line will be
empty. Skip step 4 and proceed with step 5.
4. Scroll through the program instructions using the ↑
button until the instruction line is empty.
5. Press the → button to add an instruction.
The first data entry field flashes.
6. Use the ↑ or ↓ button to set the day(s) on which the
instruction needs to be executed. Confirm with the →
button.
7. Use the ↑ or ↓ button to set the time reference
(exact, relative to wake-up or go-to-bed time) on
which the instruction needs to be executed. Confirm
with the → button.
8. Change the program time with the ↑ or ↓ button and
confirm with the → button.
Remark:
In case the wake-up or go-to-bed time is selected as
reference, the offset can be set per 15 minutes with a
limit of 4 hours. Step 9 is not applicable.
Location
5
↑
↓
Menu
→
Mode
←
Living room
Program
Location
5
↑
↓
Menu
→
Mode
←
Living room
Mo-Su 22:30
Location
5
↑
↓
Menu
→
Mode
←
Living room
Mo 14:47 22
Location
5
↑
↓
Menu
→
Mode
←
Living room
--
Location
5
↑
↓
Menu
→
Mode
←
Living room
Mo-Fr _ 0:00
Location
5
↑
↓
Menu
→
Mode
←
Living room
Mo-Fr __:00
Location
5
↑
↓
Menu
→
Mode
←
Living room
Mo-Fr 6:__
Location
5
↑
↓
Menu
→
Mode
←
Living room
_____