Velleman VMB1TC - Manual (Page 32)

32 VMB1TC Temperature controller manual – rev 5.0
Addressing
Every module on the Velbus system must have its own unique address. On modules with a rotary switch the address is
set using the ‘ADDR’ rotary switch (refer to the manual of the relevant module). On other modules e.g. the temperature
controller the address is set via the menu. These addresses may not be altered afterwards.
1. Press and hold the ‘Menu’ button for ±4 seconds to
open the extended menu.
2. If necessary scroll through the extended menu using
the ↑ or ↓ button until the ‘Configuration’ item
appears
3. Select the configuration menu with the → button.
4. Scroll through the configuration menu using the ↑ or
↓ button until the ‘Address’ item appears.
5. Select the Address menu with the → button.
6. Enter a unique address (‘01’...‘FE’) using the ↑ or ↓
button.
7. Confirm the address with the → button.
8. Exit the menu with the 5 button.
Location
5
↑
↓
Menu
→
Mode
←
Address
Location
5
↑
↓
Menu
→
Mode
←
Language
Location
5
↑
↓
Menu
→
Mode
←
Configuration
Location
5
↑
↓
Menu
→
Mode
←
Configuration
Location
5
↑
↓
Menu
→
Mode
←
Address __
Location
5
↑
↓
Menu
→
Mode
←
Address 15
Location
5
↑
↓
Menu
→
Mode
←
Address
Location
5
↑
↓
Menu
→
Mode
←
Mo 0:06