Velleman VMB1TC - Manual (Page 39)

VMB1TC Temperature controller manual – rev 5.0 39
Setting the clock
This module works together with one or more temperature sensoresVMB1TS to form a programmable thermostat. It is
important to set the right time for the internal clock.
Setting the time on this module will set the clocks of all clock containing modules that are connected to the Velbus
simultaneously.
1. Open the menu by pressing the ‘Menu’ button.
2. Scroll through the menu using the ↑ button until the
‘Clock set’ item appears.
3. Select the set clock menu with the → button.
The day-indication flashes.
4. Set the day with the ↑ or ↓ button.
5. Confirm with the → button.
The hour-indication flashes.
6. Set the hour with the ↑ or ↓ button.
7. Confirm with the → button.
The minutes-indication flashes.
8. Set the minutes with the ↑ or ↓ button.
Location
5
↑
↓
Menu
→
Mode
←
Temp sensor 01
Temp. settings
Location
5
↑
↓
Menu
→
Mode
←
Temp sensor 01
Clock set
Location
5
↑
↓
Menu
→
Mode
←
Temp sensor 01
Clk set __ 0:10
Location
5
↑
↓
Menu
→
Mode
←
Temp sensor 01
Clk set Mo 0:10
Location
5
↑
↓
Menu
→
Mode
←
Temp sensor 01
Clk set Mo __:10
Location
5
↑
↓
Menu
→
Mode
←
Temp sensor 01
Clk set Mo 14:10
Location
5
↑
↓
Menu
→
Mode
←
Temp sensor 01
Clk set Mo 14:__
Location
5
↑
↓
Menu
→
Mode
←
Temp sensor 01
Clk set Mo 14:24