Velleman VMB1TS - Manual (Page 8)

8 VMB1TS manual – edition 2 – rev.3
EMBEDDING THE TEMPERATURE SENSOR
The temperature sensor VMB1TS can be embedded in combination with 2 blank frames VMBFBI and a Velbus cover
plate VMBFDG or VMBFLG.
Push the modules from the back into the cover plate
It is also possible to use a 2- or 3-module wide frame with cover plate from the BTicino Living series.
The module must be pushed into the build-in frame from the front
It is also possible to use a 3-module wide frame with cover plate from the BTicino Light or Light Tech series.
The module must be pushed into the build-in frame from the front.
To build the sensor in into a hollow wall, use a hollow wall pattress.