Velleman VMB1TS User Manual

Page 36

VMB1TS manual – edition 2

Deleting all assigned pushbuttons for a certain function

Always remember the address of the sensor module to reinstate it later on.

Set the address of the sensor module to the function for which pushbuttons must be deleted.

Address

learning

mode

Flashing indication LEDs

Function

Pushbuttons that put the sensor
module in comfort mode

Pushbuttons that put the sensor
module in day mode

Pushbuttons that put the sensor
module in night mode

Pushbuttons that put the sensor
module in anti-freeze mode

Pushbuttons that put the sensor
module in heating mode

Pushbuttons that put the sensor
module in cooling mode

Pushbuttons that lock the local
operation of the sensor module

Pushbuttons that unlock the local
operation of the sensor module

The indication LEDs of the pushbuttons that are assigned to the selected function will flash.

Deleting all pushbutton assigned to the selected function is done by pressing the pushbutton on the front panel of the
sensor module until all LEDs are off.

When releasing the pushbutton the indication LEDs of all the assigned pushbuttons will turn off and the LEDs on the
sensor module start flashing.

When finished, reinstate the original address of the sensor module.

1 sec

Set ADDR to delete function (see
tabel above)