Velleman VMB1TS - Manual (Page 37)

VMB1TS manual – edition 2 37
Deleting all assigned pushbuttons
Always remember the address of the sensor module to reinstate it later on.
Set the address of the sensor module to ‘F1’. the comfort and day LED are flashing.
Deleting all assigned pushbuttons for all functions at once is done by pressing the mode pushbutton on the sensor
module for about 10 seconds.
The indication LEDs on the sensor module will first switch off and about 7 seconds later will start flashing to confirm
the deleting operation.
When finished, reinstate the original address of the sensor module.
10 sec
ADDR = F1