Velleman VMB1TS - Manual (Page 35)

VMB1TS manual – edition 2 35
Deleting an assigned pushbutton
Always remember the address of the sensor module to reinstate it later on.
Set the address of the sensor module to the function for which pushbuttons must be deleted.
Address
learning
mode
Flashing indication LEDs Function
F1
Pushbuttons that put the sensor
module in comfort mode
E1
Pushbuttons that put the sensor
module in day mode
D1
Pushbuttons that put the sensor
module in night mode
C1
Pushbuttons that put the sensor
module in anti-freeze mode
B1
Pushbuttons that put the sensor
module in heating mode
A1
Pushbuttons that put the sensor
module in cooling mode
91
Pushbuttons that lock the local
operation of the sensor module
81
Pushbuttons that unlock the local
operation of the sensor module
The indication LEDs of the pushbuttons that are assigned to the selected function will flash.
Deleting an assigned pushbutton is done by pressing it until its indication LED switches off.
When finished, reinstate the original address of the sensor module.