Spicer SERVICE CATALOG - Manual (Page 7)

5
© Dana Spicer
Data Sheet
Standard Variant 0.02
Driveshaft
with length compensation
Design
Recommended connection
Companion flanges
- XS : Cross serration according to ISO 8667
Driveshaft flange yokes
- XS : Cross serration according to ISO 12667
Please note:
All values given are nominal. Exact information
should only be obtained from drawing.
All applications must be approved by Dana. Specifications and/or design are subject to change without notice or obligation.
β
S
K
M
L z
M
A
D
Compact 2030 2035 2040 2045 2047 2055 2060 2065
Funktional limit torque T cs kNm 6,5 10,0 14,0 17,0 19,0 25,0 30,0 35,0
Connection - KV 120 KV 150 KV 150 KV 180 KV 180 KV 180 KV 180 KV 180
Optional KV 150 KV 120 KV 180 KV 150 KV 150
Flange-ø A mm 120 155 155 180 180 180 180 180
Max. Joint angle ß ° 25 25 35 25 44 25 44 25 25 44 30 25
Max. Rotation-ø K mm 127 144 160 174 174 178 196 206
Standout M mm 63,5 75 88 82 102 87 108 87 92 108 100 105
Compressed length L
z min.
mm 475 542 667 546 693 579 729 579 616 735 635 676
Sliding movement L a mm 110 110 180 110 180 110 180 110 110 180 110 110
Tube D x S mm 90 x 3 100 x 3 85 x 5 120 x 3 100 x 4,5 120 x 4 110 x 5 120 x 5 120 x 6 130 x 6 142 x 6
Weight of 1m-shaft G
W
kg 17,6 23,3 27,0 30,8 33,5 37,9 42,8 39,2 47,6 49,1 55,0 70,6
Weight of 1m-tube G
R
kg 6,4 7,2 9,9 8,7 10,6 11,4 12,9 14,2 16,9 18,4 20,1