Ohaus CD-11 Indicator Manual multi - Manual (Page 41)

EN-35 CD-11 Indicator
5.2 Error Codes List
The following list describes the various error codes and which can appear on the display and the suggested
remedy.
LoBat Indicates weak batteries. Approximately 20 minutes of operating time remain.
Error 1 Indicates an overload condition.
Error 2 Indicates an underload condition.
Error 7 EEPROM data incorrect.
Error 14 Zero exceeds ZERO% and cannot be zeroed.
Err 21 Calibration data does not match current full scale, Grad and Cal Point settings. Settings must
be restored or the Indicator must be recalibrated using the current settings.
5.3 Service Information
If the Troubleshooting section does not resolve or describe your problem, you will need to contact an authorized
Ohaus Service Agent. For Service assistance in the United States, please call Aftermarket, Ohaus Corporation toll-
free at (800) 526-0659. An Ohaus Product Service Specialist will be available to help you.
5.4 Replacement parts
Description Ohaus Part No.
AC Adapter North America, 100-132 V ac, 60 Hz 80500435
AC Adapter Continental Europe, 196-253 V ac, 50 Hz 80500436
AC Adapter UK, 196-264 V ac, 50 Hz 80500437
5.5 Accessories
Description Ohaus Part No.
Adjustable Column 71135127
Wall Mounting Bracket 71152686
Scale Base Mounting Plate 80250686
RS232 Interface Cable/Printer SF42 80500537
RS232 Interface Cable/blunt end 80500430
RS232 Interface Cable/PC 25 Pin 80500431
RS232 Interface Cable/PC 9 Pin 80500433
Printer SF42
5.6 Technical Data
Materials
Housing GEC6200 Cycoloy plastic.
Keypad/display overlay polyester
Ambient conditions
The technical data is valid under the following ambient conditions:
Ambient temperature
-10°C to 40°C/ 14°F to104°F
Relative humidity 10%.......95%, noncondensing
Height above sea level up to 4000m