beautypg.com

6 clear tare operation, 5 gross/net/tare recall operation, 7 unit switch operation – Ohaus CD-11 Indicator Manual multi User Manual

Page 33: En-27 cd-11 indicator

background image

EN-27

CD-11 Indicator

4.6 Clear Tare Operation

To clear the tared weight stored in memory, proceed as follows:
With no load on the scale base, press the TARE button.

Stable

4.5 Gross/Net/Tare Recall Operation

Gross
Brutto

Stable

When a container has been placed on the platform and tared, it's weight is
stored in memory. Adding material to the container is shown as NET weight.
The gross weight is a combination of the tared weight and the material. The
G/N/T/

Menu button allows switching between GROSS, NET and TARE weights.

Repeatedly press the G/N/T/

Menu button to cycle through Gross, Tare and Net

readings. The sample illustrations indicate a tare weight of 2kg simulating a
container, a net weight of 3kg which would be the material in the container
and a gross weight of 5kg which is the total weight of the container and
material. After a few seconds, the display will return to a NET weight.

Stable

Tare

Stable

Net

Gross
Brutto

4.7 Unit Switch Operation

To switch measuring units, proceed as follows:
Press and hold PRINT/

Units button until display changes to selected measur-

ing unit. Depending on which units are enabled in the menu, you have a
choice of g, lb, kg or oz. The display sample indicates 3kg load changed to
lbs.

Stable

Gross
Brutto

Stable

Net

Gross
Brutto

> 0 <

> 0 <

> 0 <

> 0 <

> 0 <

Stable

*